How to use GM Tech 2 pull codes on SAAB 9-3
Car model and year: 2006 Saab 9-3, 2.0T Symptom: having AC issues GM Scanner to use: GM Tech 2 + Saab card (The last Saab Card release is v148 for the Saab.) Purpose: to pull the fault codes You should buy a spare card……..they are cheap! I bought spare Saab card from the same place the Tech II clone was purchased from (obdii.shop). They’re not too expensive, I think $20US each including shipping. Since I need to work with Saab 9000 I wrote a V44 image modified to work with 32MB cards. (The stock V44 image only works on a 10MB card which is a little tougher to find.) You don’t have to worry about that part, just order a V148 Saab card and it should just plug and play. Note: If the Tech2 won’t recognize the card your best chance of recovery is to try and do a full erase with the elan card writer software and then load a relevant bin file. In the meantime buy another one. Good to know: If to code a CIM you need security access. You can use either the hacked Globaltis of TIS2000 to obtai...